RUMBLE STRIPS / TRAFFIC CALMING PRODUCTS
REFLECTIVE white or Yellow
Highly reflective, brilliant white or yellow low profile rumble strips are designed for use where reflective traffic calming and speed reduction is required.
Unique design and its reflective ability provide motorists with bright night illumination even under wet conditions.
Audible vibrating rumbler.
Speed reduction without the "bump".
Ideal for transverse speed reduction in construction zones, school zones and railroad crossings.

Initiate speed reduction in advance quickly and effectively.
Features
  • Audible warning
  • Controlled vibratory warning
  • Visual daytime warning
  • Visual night-time warning
  • Visual reflective wet-night warning

Shoulder applications for jersey barrier and bridge-decks.
Recommended layout for temporary or permanent rumble strip applications. Designed to channel traffic flow away from barrier wall.
Recommended length between spacing
(based on 6" wide rumble strip)
  • 30 to 40 m.p.h. - 12 inches
  • 40 to 55 m.p.h. - 24 inches
  • 55+ m.p.h. - 48 inches

Benefits
  • Temporary or permanent applications
    (asphalt or concrete surfaces)
  • Easy installation
  • Flexible and conformable
  • Does not crack like ceramics and rigid plastics
  • Available in reflective and non-reflective colors
    (white, yellow and non-reflective black)
  • Immediate effective solutions influencing driver behavior
  • Advance notice of upcoming stop signs, toll booths check points and construction zones
  • Use in high risk areas such as intersections, school zones and railroad crossings
  • Excellent traffic device for bridge deck safety providing motorists with superior visibility and a distinct audible warning guiding motorists away from dangerous barrier walls.
  • Benefit cost ratios of 66:1 from the use of rumble strips as a road treatment for reducing "run off the road accidents"!

Rumble strips can be used in work zones, railroad crossings, bridge decks and roadway shoulder channelization.

RECOMMENDED FOR USE ON ASPHALT OR SMOOTH CONCRETE SURFACES. TEMPORARY OR PERMANENT INSTALLATIONS.
INSTALLATION
Apply adhesive
Install strips

NON-REFLECTIVE BLACK

Non-reflective black matte finish rumble strips are designed for use where traffic calming and speed reduction is required.

Provides audible and vibratory warning to motorists alerting them of danger zones.
Black matte finish blends into bituminous asphalt surfaces for less inconspicuous applications.
12 inch x 12 foot strip requires 6 rumble strips as shown.
0.24 inches
6.09 millimeters

ADHESIVE
CONTACT CEMENT:
One gallon of contact cement for every 50 to 75 sq. ft.
  • 10 rumble strips = 20 square feet.
  • 20 rumble strips = 40 square feet.
Quantities available:
One gallon and five gallon pails.

Questions?
CONSULT OUR ON-LINE APPLICATION INSTRUCTIONS OR CONTACT YOUR US REFLECTOR'S REPRESENTATIVE FOR ADDITIONAL INFORMATION.
ITEMS:
Single units:
COLOR
REFLECTIVE
SIZE
ITEM #
QTY
COST
Yellow
Yes
4' x 6"
0351-6Y-RRS
1
$25.50
White
Yes
4' x 6"
0351-6W-RRS
1
$25.50
Black
No
4' x 6"
0351-6BK-NRS
1
$25.50
Box of 10 units (40 Linear feet)
COLOR
REFLECTIVE
SIZE
ITEM #
QTY
COST
Yellow
Yes
4' x 6"
0350-6Y-RRS
10
$240.00
White
Yes
4' x 6"
0350-6W-RRS
10
$240.00
Black
No
4' x 6"
0350-6BK-NRS
10
$240.00
ADHESIVE
TYPE
SIZE
ITEM #
COST
Contact Cement
1 Gallon
0355-1CC
$30.00
5 Gallon
0355-5CC
$125.00
Bituminous
Call
INSTALLATION INSTRUCTIONS:
GO
TO TOP
Copyright US REFLECTOR © All rights reserved
Go - US REFLECTOR home